Filter
Top Products
Sec tion 3 - De tailed Com po nents De scrip tion
Re ceiver Setup and Op er a tion
1.
Place the re ceiver and an ten nas where there is a clear line
of sight to the area where the trans mit ter will be used. Ro --
tate the an ten nas to sep a rate them by 90 de grees.
2. Con nect the power sup ply cord to the re ceiver. Plug the
power sup ply into an AC out let. Turn the re ceiver on and
con firm that it is ON by check ing the main dis play screen.
Cau tion: Please make sure the AC power sup ply is the cor --
rect volt age for your lo cal re quire ments be fore it is
plugged into the wall.
3. Man ual Chan nel Change. Press the SET but ton and the
Group num ber will start to flash. The Up and DOWN but --
tons al low you to scroll through the fac tory set group.
When the group you de sire is dis played, press SET to se --
lect that group and the Chan nel Num ber will start flash ing.
Scroll to the de sired chan nel and press SET to se lect. The
num bers will stop flash ing and the new group and chan nel
are in stalled.
4. Fre quency As sign ment (Out side of pre set Groups and
Chan nels), press SET and UP at the same time and the
group and chan nel will go blank and the Fre quency will
start flash ing. Use UP/DOWN to scroll in 25 KHz steps to
the de sired fre quency. Press SET and the fre quency will be
se lected and stop flash ing. Press Set and UP at the same
time to re turn to group and chan nel op er a tion. Hint: hold --
ing in the Up or Down key will in crease the speed of the
scroll. Just re lease and press again for fine con trol
5. Ad vanced ClearScan:
TM
This fea ture au to mates the pro --
cess of find ing a clear group of inter-mod u la tion free
chan nels and the clear est chan nels within those groups.
a.
ClearScan
TM
, for Groups: From the main dis play
screen, push SET once and the Group Num ber will
flash. While Group is flash ing, press and hold SET un --
til ClearScan
TM
ap pears, re lease the set key. When the
scan is com pleted, the dis play will show the group
with the most clear chan nels and the Chan nel num ber
will in di cate how many clear chan nels are in that
group. Use the UP/DOWN keys and to view other
groups and press SET to se lect a group. The Group
will be set and the Chan nel will start to flash. Se lect a
chan nel man u ally or use ClearScan
TM
for Chan nels.
ClearScan
TM
for Chan nels: To scan for the clear est
chan nel in a group, press and hold set while the Chan --
nel is flash ing un til ClearScan
TM
ap pears, re lease the
SET but ton. When the scan is com plete, the dis play
will show the clear est avail able chan nel. Use
UP/DOWN to scroll through the other avail able chan --
nels rank from clear est to least clear (but still avail able
for use, ClearScan
TM
will not dis play any chan nel that
can't be used). Press SET to se lect the chan nel.
b.
c.
Auto ClearScan:
TM
This func tion will find the clear --
est group and chan nel with the press of just one but ton.
With noth ing flash ing, press and hold the SET but ton
un til ClearScan ap pears on the right side of the screen.
When the scan is com plete, the re ceiver will be set to
the clear est chan nel in the clear est group.
-2-
1. Power ON/OFF
2. Graph i cal Dis play
a.
Chan nel Dis play
b.
Fre quency
c.
Bat tery Strength In di ca tor
d.
Di ver sity In di ca tor
e.
RF Strength of
Sig nal In di ca tor
f.
Au dio Level In di ca tor
3. Dis play Con trol But tons (Set/Up/Down)
4. Power Con nec tor
5. XLR Bal anced Mic/Line Level Au dio Out put
Line Level Ad just able
6. Un bal anced Line Level Au dio Out put
Con nec tor with Level Ad just ment
7. TNC An tenna In put Con nec tors
8. Power Cord Re tainer
44
Antenna
High
Z
Line
Level
Mic Line
Telex Communications, Inc. Made in U.S.A.
12-15V
AC/DC
++
--
U.S. Patent No. 6,256,484
Balanced
Audio
RE-2
BAND BBAND B
Tested to Comply
with FCC Standards
CANADA XXXXXX
S.N. 8A
77
66
55
88
Fig ure 2 - RE-2 Back Panel
GPA CHGPA CH
12u 0512u 05
-20 -10 -6 - 3 0 +3-20 -10 -6 - 3 0 +3
1 3 10 30 1001 3 10 30 100
EVEV
AUDIOAUDIO
set
11
22
33
R
2
power
33
Fig ure 1 - RE-2 Front Panel
Antenna
High
Z
Line
Level
Mic Line
Telex Communications, Inc. Made in U.S.A.
12-15V
AC/DC
++
--
U.S. Patent No. 6,256,48
Balanced
Audio
RE-2
BAND BBAND B
Tested to Comply
with FCC Standards
CANADA XXXXXX
S.N. 8A
90
Proper An tenna Orientation
RE-2 Re ceiver Con trols, Con nec tors, and In di ca tors