Filter
Top Products
Trou ble Shoot ing Guide (con tin ued)
-10-
Prob lem
Interference (continued)
Short range or drop-outs
Can't change set tings on re ceiver or
trans mit ter
Bodypack or Handheld trans mit ter
will not turn off, dis play says On-Loc
Pos si ble Causes
Re ceiver is too close to dig i tal sig nal
pro ces sor or sim i lar de vice
Strong elec tro mag netic field from
stage light ing or other source near the
trans mit ter or re ceiver, which may be
pro duc ing RF noise at or near the op --
er at ing fre quency
RF re flec tive metal ob sta cles be tween
the trans mit ter and re ceiver
Poorly ori ented beltpack an tenna
Faulty re ceiv ing an tenna sys tem
Lock-out fea ture is en abled
On/Off lock-out is en gaged
So lu tions
Move the re ceiver to a dif fer ent
location
Use ClearScan
TM
to change the op er at --
ing fre quency. Re pair or re move the
source of in ter fer ence. Move the re --
ceiver to a dif fer ent lo ca tion.
Move the ob sta cles, or reposition the
re ceiver/an ten nas
Check the an tenna connection and re --
ori ent the bodypack so the an tenna is
ver ti cal (up and down) and fac ing the
re ceiver, if pos si ble.
Check all an tenna connections and re --
po si tion to be in line-of-sight with the
trans mit ter
Dis able lock out (see pages 3 and 8)
Put the on/off switch in the off po si tion
and press one of the pro gram ming but --
tons (see page 8)