Filter
Top Products
Step 12. Install Hood
NOTE: All models must have a hood installed
prior to operating.
Refer to Figure 30. Install hood by sliding it into
the slots on the lower edge of the cabinet top.
Step 13. Finishing Requirements
Wall Details
Complete finished interior wall.
To install the appliance facing flush with the
nished wall, position framework to accom-
modate the thickness of the finished wall
(Figure 30).
For Cold Climate Insulation, see Page 5.
For Clearances, see Page 7.
Top of Appliance
1 in (25 mm) min.
Figure 30: Combustible Wall Framing
Combustible Finished
Wall Materials
Combustible material
may touch appliance top.
Hood
3" Clearance min.
IMPORTANT!
Bend up standoffs
to vertical position.
Header
SUPERIOR
®
B-VENT GAS FIREPLACES • MODELS SLBV-35, SLBV-40 • INSTALLATION INSTRUCTIONS
23
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.