Sunfire OLE-2SF Indoor Furnishings User Manual


 
Introduction
The Olé
®
-2SF Film Interactive
Touchpad (FIT) is a revolutionary
in-wall controller for your Sunre
receiver or processor. Using a
photographic lm overlay instead of
hard buttons, it marries the beauty
of a touchscreen with the simplicity
of a keypad –seamlessly controlling
all major functions of your home
theater or secondary room.
The backlit lm transparency
provides system control icons and
functions, while a 4-line 2" color
OLED displays multiple pages of
source control and feedback to the
user. Multiple IR commands, or
‘Sequences’, can be issued from a
single press of any button. Program-
ming is accomplished with Sunre’s
SunTools™ setup software, and is
done through a direct link from a
computer to the mini-USB download
port on the front of the Olé-2SF.
Each button location (or “hot
spot”) is assigned a command
that controls sources such as
A/V equipment, HVAC systems,
drapes, shades, lighting systems,
or even replaces! Your Olé-2SF is
congured out of the box to control
your Olé-ready Sunre receiver or
processor’s Zone 2 output. Custom-
programming by your authorized
Sunre dealer will allow recongur-
ing of the Olé-2SF to control the
main theater system and a variety of
functions required for your specic
system.
Unpacking
Your Olé-2SF touchpad should
reach you in perfect condition. If
you do notice any shipping damage,
please contact Sunre immediately.
Gently lift out the touchpad and all
the packing material. It is important
to save all the packing materials and
the box in case your touchpad ever
needs to be moved or shipped for
repair.
Make sure that you keep your
sales receipt. It is the only way
to establish the duration of your
Limited Warranty and it may come in
useful for insurance purposes.
4