Filter
Top Products
Programming
The Olé-2SF must be pro-
grammed with Sunre’s SunTools
setup software using a PC running
Windows XP. Downloads are facili-
tated through the USB download
port on the front of the unit.
Note: A standard USB-A to USB-
mini-B cable must be utilized for
programming and is not included
with the Olé-2SF.
To download a SunTools
project:
• Ensure that your PC is running
the latest version of SunTools
software. Visit sunre.com for
software downloads and updates.
• Remove the wall plate to access
the USB download port.
• Connect a standard USB-A to
USB-mini-B cable between a
USB port on the PC and the USB
download port on the front of the
Olé-2SF touchpad.
• Navigate to the SunTools Olé
transfer page to begin the transfer.
• Wait until “DONE OK” is displayed
on the Olé-2SF’s screen before
disconnecting the USB cable from
the USB Download Port.
USB download port
Laptop running
SunTools
USB-A to USB-mini-B cable
18