40
T&P VALVE DISCHARGE PIPE
Explosion Hazard
Temperature-Pressure Relief Valve
must comply with ANSI Z21.22-
CSA 4.4 and ASME code.
Properly sized temperature-
pressure relief valve must be
installed in opening provided.
Can result in overheating and
excessive tank pressure.
Can cause serious injury or death.
Water Damage Hazard
Temperature-Pressure Relief Valve discharge
pipe must terminate at adequate drain.
•
CAUTION
T&P Valve Discharge Pipe Requirements:
Shall not be smaller in size than the outlet pipe size of the
WATER LINE CONNECTIONS
WATER PIPING DIAGRAMS
NOTE:
THERMOMETERS (NOT SUPPLIED)
WATER (POTABLE) HEATING AND SPACE HEATING