Filter
Top Products
3
Technical Training Department ©2003
Ashland City, Tennessee
SBN TANK TYPE COMMERCIAL GAS WATER HEATER
SERVICE HANDBOOK
Qualifications
Installation or service of this water heater requires ability equivalent to that of a
licensed tradesman in the field involved. Plumbing, air supply, venting, gas supply and
electrical testing skills are required.
Tools Required
• Phillips head screwdriver
• standard screwdrivers
• 3/8 and 7/16 inch open end wrench
• set of marked drill bits
• electrical multimeter tester capable of measuring continuity, AC voltage and DC
voltage
• gas pressure gauge or manometer (gauge - pt. no. 8099-2)
• water pressure gauge (pt. no. 4798)
• thermometer (pt no. 4870 - range 0 - 220 degrees F)
• 1/2 inch socket with extension for removal of the clean out cover
• 1-1/16 inch socket with extension for anode removal
Custom Commercial Storage Tank Model Number Break Down
U G V 66 01500 V A
1 2 5
U = Unjacketed
J = Jacketed
G = Glass-Lined
E= Epoxy
B = Black Steel
C + Cement
V = 5 Year
Warranty
Diameter
Gallon Capacity
V = Vertical
H = Horizontal
A = ASME
ASME Pressure Rating =
100# or 125# or 150# or 160#
SPECIAL NOTE: All model number appearing on rating plate and carton labels will
be compressed. Example: UGV6601500VA125