Filter
Top Products
Page 10 © Copyright 2006, Sargent & Greenleaf
Figure 4
Step 4—Carefully slide the battery behind the keypad, into the
cavity that is designed to hold it (Figure 4). Be sure the battery
has dropped all the way to the bottom of the cavity.
Step 5—Gently place any excess wire into the cavity. Make sure
it is not in a position to be caught between the keypad ring and
the keypad base when the ring is pushed back against the base
(Figure 5).
Step 6—Once the wires are safely positioned out of harm’s
way, push the keypad ring back up against the base, then turn
it clockwise until the yellow tab snaps back into its normal
position (Figure 6).
Check your lock operation at least three times with the container
door open before closing it.
Figure 5
Figure 6
Battery changing instructiOns
S&G
®
Z
03
D-Drive
™
Multi-User Electronic Safe Lock
2005 Series