SPX Cooling Technologies API 610 Heat Pump User Manual


 
10 Introduction CR/EN (1004) 4.0
1.3 Guarantee
Johnson Pump shall not be bound to any guarantee other than the guarantee accepted
by Johnson Pump. In particular, Johnson Pump will not assume any liability for explicit
and/or implicit guarantees such as but not limited to the marketability and/or suitability of
the products supplied.
The guarantee will be cancelled immediately and legally if:
Service and/or maintenance is not undertaken in strict accordance with the
instructions.
The pump is not installed and operated in accordance with the instructions.
Necessary repairs are not undertaken by our personnel or are undertaken without our
prior written permission.
Modifications are made to the products supplied without our prior written permission.
The spare parts used are not original Johnson Pump parts.
Additives or lubricants used are other than those prescribed.
The products supplied are not used in accordance with their nature and/or purpose.
The products supplied have been used amateurishly, carelessly, improperly and/or
negligently.
The products supplied become defective due to external circumstances beyond our
control.
All parts which are liable to wear are excluded from guarantee. Furthermore, all
deliveries are subject to our “General conditions of delivery and payment”, which will be
forwarded to you free of charge on request.
1.4 Inspection of delivered items
Check the consignment immediately on arrival for damage and conformity with the advice
note. In case of damage and/or missing parts, have a report drawn up by the carrier at
once.
1.5 Instructions for transport and storage
1.5.1 Weight
A pump or a pump unit is generally too heavy to be moved by hand. Therefore, use the
correct transport and lifting equipment. Weight of the pump or pump unit are shown on
the label on the cover of this manual.
1.5.2 Use of pallets
Usually a pump or pump unit is shipped on a pallet. Leave it on the pallet as long as
possible to avoid damages and to facilitate possible internal transport.
! When using a forklift always set the forks as far apart as possible and lift the
package with both forks to prevent it from toppling over! Avoid jolting the
pump when moving it!