Filter
Top Products
INSTALLATION
EXHAUST PIPE INSTALLATION
The unit is a portable air conditioner that may be moved from room to room.
1. Using the foam strips / Window installation
Used to cover the window gap and can be cut to size if necessary.
FIG.8
• Attach hose to unit and insert other end through the foam strip.
• Attach Round Connector (part 11) by turning clock-wise.
• Insert strip into window gap as shown and slide window across so that foam is held
securely. This technique may also be used for sash windows. Note: Take care to
maintain protection against intruders.
• The best distance between the machine and window or wall is 31~39 inches.
2. Using the adaptor / Wall installation
FIG.9
FIG.10
• Cut a 5” diameter hole in the wall or window.
• Attach hose to unit and insert other end through the wall (or window).
• Attach Round Connector (part 11) from the outside.
• You may secure the Round connector to the wall by using small screws (not included)
through the holes.
• When not in use, cover the opening with the cover provided.
6
Foam strips
Wall or Window
Round connector
aLQFK
aLQFK
05-03-457 A029-OK.PDF