Filter
Top Products
.MAINTENANCE
Always unplug the unit before cleaning and maintenance.
Cleaning the Housing
Use a soft, damp cloth to wipe the body clean.
Never use strong chemicals, oil-based products, detergents, chemically treated cloths
or other cleaning solutions. These could possibly damage the cabinet.
Cleaning the Filter
First remove the black active carbon filter from the frame, tap lightly to remove loose dust
and dirt. Use a vacuum cleaner or tap the white filter lightly to remove loose dust and dirt.
Then rinse the white filter thoroughly under running water (no hotter than 104°F). Let dry
under sun thoroughly before replacing.
Do not wet the active carbon filter! Remove from frame before washing.
Notice! Never operate the unit without the filters.
End of season storage
Unplug the unit and drain the condensed
water COMPLETELY (please refer to page
13). Clean or change the filter.
On a warm day, turn the unit to fan mode for a
couple of hours so that the inside can dry out
completely.
It is recommended that the unit be put back
into its original carton for storage.
Do not stack heavy objects on top of the unit.
Storing The Power Cord
When the unit is not in use, please store the
power cord away as shown in Figure 25.
FIG.25
15
Cord
05-03-457 A029-OK.PDF