XG200 Elliptical
8
1. Attach the transport wheels (77) to each bracket with the two bolts (44) and nuts (34). Partially
tighten with the wrenches provided (110 & 111). Over tightening the hardware won’t allow the
wheels to rotate.
2. Remove the cover on the back of the console and install the 4 C batteries.
3. Snap the four end caps (67) onto the cup washers on the left & right pedal arm assemblies.
CONSOLE
3
#44. 5/16” x 1-3/4”
Bolt
(2 pcs)
#34. 5/16”
Nut
(2 pcs)
HARDWARE