Spirit XE 295 Indoor Furnishings User Manual


 
XE195 / XE295 Elliptical
16
STEP 4: PLASTICS ASSEMBLY
Install the Connecting Arm Covers (2 each 57 & 57-1 and 58 & 58-1) over the connection of
the rod end and Handle Bars with the M5 x 15mm Screws (87) and 3.5x10m/m Self Tapping
Screws (105) by using the Short Phillips Screw Driver.
Install the two Wheel Covers (52) using the four M5x15m/m Phillips Head Screws (105).
Locate the two Rear Stabilizer Covers (19,20) and two Middle Stabilizer Covers (19,20) for the
Rear Rail Assembly and install with four M5 x 15m/m Screws (105). Then install front stabilizer
cover (49) with two M5 x 15m/m Screws (105).
Install the Front Handle Bar Covers (54-1 left, 55-1 right) and Rear Handle Bar Cover (54 left,
55 right) over the Handle Bar axle connections with the six 3.5x10mm Self Tapping Screws
(87).
Install the front (122) and rear (121) console mast covers with three M5 x 15m/m Screws (105)
and two 3.5x12m/m Sheet Metal Screw (87).