Filter
Top Products
37X Speed Dome Camera 35/50
Parking Action Setup
PARKING ACTION SETUP
------------------------
PARK ENABLE OFF
WAIT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
This feature allows the camera to begin a specified action
after a programmed time of inactivity.
z Park Enable
[ON/OFF]
If Park Enable is set to ON, the camera
runs an assigned function automatically if
there is no PTZ command during the
programmed "Wait Time".
z Wait Time [1~59 sec. / 1~180 min.]
Wait Time can be programmed from 1
second to 180 minutes.
z Park Action [HOME/PRESET/PATTERN/SWING/GROU
P/PREV ACTION]
This feature defines the activity when the
camera parks. If Park Action is set to
“HOME”, the camera moves to the home
position which is memorized when the
system boots. If Park Action is set to
“PREV. ACTION”, the camera runs the
previous action which it ran most recently.
OSD MENU 4