Filter
Top Products
37X Speed Dome Camera 31/50
Auto Exposure Setup
AE SETUP - GLOBAL
------------------------
BACKLIGHT OFF
DAY/NIGHT AUTO
BRIGHTNESS 50
IRIS AUTO
SHUTTER ESC
AGC MIDDLE
SSNR MIDDLE
SENS-UP <AUTO>
BACK
EXIT
z Backlight [OFF/WDR/BLC/HLC] or [OFF/BLC/HLC]
or [ON/OFF]
Sets Backlight Compensation. If a bright
backlight is present, the subjects in the
picture may appear dark or as a
silhouette. Backlight compensation
enhances objects in the center of the
picture. The camera uses the center of the
picture to adjust the iris. If there is a
bright light source outside of this area, it
will wash out to white. The camera will
adjust the iris so that the object in the
sensitive area is properly exposed.
Some modles has WDR(Wide Dynamic
Range) function, which are better function
than BLC. HLC(High Light Compensation)
function removes the high light in a
limited environment such as parking
garage.
z Day/Night [AUTO/DAY/NIGHT] or
[AUTO1/AUTO2/DAY/NIGHT]
Sets Day&Night mode.
There are 2 AUTO modes in ×10 model
# AUTO1 Mode : The sensitivity to change
a mode is fixed.
# AUTO2 Mode : The sensitivity to change
Night mode to Day mode is adjustable.
The sensitivity range is 1~255. The higher
numeric value is selected, the lower
illumination Night mode changes to Day
mode at. If this is set to AUTO2 mode,
ACG is fixed to HIGH.
z Brightness [0~100]
Adjusts the brightness of the images. Iris,
The Shutter Speed and Gain are adjusted
automatically in correspondence with
each numeric value.
OSD MENU 4