Filter
Top Products
19
US
Presetting radio stations
You can preset 20 FM stations, and 10 AM stations. Before
tuning, make sure to turn down the volume to minimum.
1 Press TUNER/BAND repeatedly until the band you
want appears.
2 Press and hold TUNING + or – until the auto
scanning starts.
Scanning stops when the system tunes in a station.
“TUNED” and “ST” (for stereo program) appear.
3 Press TUNER MENU repeatedly until “Memory?”
appears.
4 Press ENTER.
A preset number appears.
5 Press X/x to select the preset number you want.
6 Press ENTER.
The station is stored.
7 Repeat 1 to 6 to store other stations.
To change the preset number
Restart from Step 1.
Listening to the radio
Preset radio stations in the system’s memory first (see
“Presetting radio stations” (page 19)).
1 Press TUNER/BAND repeatedly until “FM” or “AM”
appears.
The last received station is tuned in.
2 Press PRESET + or – repeatedly to select the
preset station you want.
Each time you press the button, the system tunes in one
preset station.
3 Adjust the volume by pressing VOLUME +/–.
To turn off the radio
Press "/1.
To listen to non-preset radio stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or – repeatedly.
For automatic tuning, press and hold TUNING + or –. Press
TUNING + or – to stop the automatic tuning.
• If an FM program is noisy, press FM MODE so that “MONO”
appears. There will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo effect.
• To improve reception, reorient the supplied antennas.
Other operations
Listening to the radio
H
X
Mm.
>
-
ENTERCLEAR
x
O
TUNER MENU
TUNING +/–
C/X/x/c
ENTER
TUNER/BAND
PRESET +/–
VOLUME +/–
CLEAR
DISPLAY
FM MODE
TUNED ST
TUNED ST
TUNED ST
Tip
TUNED ST
TUNED ST
continued