Filter
Top Products
16
US
If picture and sound are not synchronized, you can adjust the
delay between picture and sound.
1 Press AMP MENU.
2 Press x/X repeatedly until “CUSTOMIZE” appears,
then press ENTER or c.
3 Press X/x repeatedly until “A/V SYNC” appears,
then press ENTER or c.
4 Press X/x to select the setting.
• SYNC OFF: does not adjust.
• SYNC ON: adjusts the difference between picture and
sound.
5 Press ENTER or AMP MENU.
The AMP menu turns off.
• Depending on the input stream, this function may not be effective.
The brightness of the front panel display can be set to one of
2 levels.
1 Press AMP MENU.
2 Press x/X repeatedly until “CUSTOMIZE” appears,
then press ENTER or c.
3 Press X/x repeatedly until “DIMMER” appears,
then press ENTER or c.
4 Press X/x to select the brightness of the front
panel display.
• DIMMER OFF: bright lighting.
• DIMMER ON: low lighting. Turns off the lighting
when the power is off.
5 Press ENTER or AMP MENU.
The AMP menu turns off.
Adjusting the Delay Between the
Picture and Sound
(A/V SYNC)
Note
H
X
Mm.
>
-
ENTERCLEAR
x
O
AMP MENU
X/x/c
ENTER
Changing the Brightness of the
Front Panel Display
(DIMMER)
H
X
Mm.
>
-
ENTERCLEAR
x
O
AMP MENU
X/x/c
ENTER