Filter
Top Products
107
Troubleshooting Дополнительная информация
C:21:00
English
Warning indicators and messages
If indicators and messages appear on the screen, check the following:
See the page in parentheses “( )” for more information.
Warning indicators
Warning indicator as to tape
Slow flashing:
•The tape is near the end.
•No tape is inserted.
•The write-protect tab on the
cassette is out (red).* (p. 23)
Fast flashing:
•The tape has run out.*
Self-diagnosis display (p. 106)
Moisture condensation has
occurred*
Fast flashing:
•Eject the cassette, turn off your
camcorder, and leave it for
about 1 hour with the cassette
compartment open. (p. 123)
You need to eject the cassette*
Slow flashing:
•The write-protect tab on the
cassette is out (red). (p. 23)
Fast flashing:
•Moisture condensation has
occurred. (p. 123)
•The tape has run out.
•The self-diagnosis display
function is activated. (p. 106)
* You hear the melody or beep sound.
** This indicator appears in the viewfinder only.
The battery pack is dead or nearly
dead
Slow flashing:
•The battery pack is nearly dead.
(p. 15)
Depending on conditions, the
environment or the battery pack, the
warning indicator may flash, even if there
are 5 to 10 minutes battery remaining.
Fast flashing:
•The battery pack is dead.
Warning indicator as to tape or
battery pack**
Slow flashing:
•The battery is nearly dead.
•The tape is near the end or has
run out in the recording mode.
Fast flashing:
•The battery pack is dead.
•The tape has run out.*