Filter
Top Products
105
Troubleshooting Дополнительная информация
Others
Symptom Cause and/or Corrective Actions
• COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 96)
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity. (p. 139)
• The batteries are dead.
c Insert new ones. (p. 139)
• Disconnect the power code of the AC power adaptor or remove
the battery pack, then reconnect it in about 1 minute. Turn the
power on (p. 15, 19). If the functions still do not work, press the
RESET button using a sharp-pointed object. (If you press the
RESET button, all the settings including the date and time
return to the default.) (p. 135)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least 1
hour to acclimatize. (p. 123)
• Some troubles have occurred in your camcorder.
c Remove the cassette and insert it again, then operate your
camcorder.
• The AC power adaptor is disconnected.
c Connect it firmly. (p. 15)
• Charging has been completed.
• The battery pack is not installed properly.
c Install the battery pack properly. (p. 14)
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony service
facility.
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony service
facility.
• The POWER switch is not set to OFF (CHARGE).
c Set it to OFF (CHARGE).
• A deviation has occurred in the remaining battery time.
c Charge the battery pack fully again (p. 15)
The Remote Commander supplied
with your camcorder does not work.
The melody or beep sounds for
5 seconds.
While charging the battery pack, the
CHG lamp does not light up.
Types of trouble and their solutions
No function works though the power
is on.
You cannot charge the battery pack
installed to your camcorder.
While charging the battery pack, the
CHG lamp flashes.
The power goes off although the
remaining battery time indicator
indicates that the battery pack has
enough power to operate.