Filter
Top Products
NOTICE:
If the dual-duct type unit is used as single-duct type one, please refer to the follow-
ing instructions:
1
Attach the grille and the cover to the
unit.
Open the bafe and remove it. Insert
the 2 projections on the grille into the 2
holes on the back plate of the unit, and
close the grille.
Insert the two projections on the cover
into the two holes on the unit,
2
Install one exhaust hose.
E-20
INSTALLATION AND REMOVAL OF EXHAUST HOSE
Cover
Grille
Projection
Hole
Bafe
Projection
CV-P13PX_eng.indd 22 09.1.26 3:36:26 PM