Filter
Top Products
1
Cut the foam seal A to the proper length
and attach it to the window frame.
2
Attach 2 window exhaust adapters to
the window panel inside opening.
3
Attach 2 protective screens to the
outside of the window exhaust adapter.
Use 4 screws to attach the protective
screens onto the outside of the window
exhaust adapter.
4
Install2raindeectorstotheoutsideof
the window panel.
Line up the holes on the rain deec
-
tor and the window panel. Use 8 bolts,
8 washers, 8 split-ring washers and 8
nuts to attach the rain deector onto the
window panel.
5
Install the window panel into the window
frame.
If the inner height of the window is less
than 28" (718mm) high.
(1) Remove the adjustment panel from the
window panel, and cut the window pan-
el to the same height as the window.
(2) Open the window sash and place the
window panel on the window frame.
(3) Secure the window panel to the window
frame with 2 large wood screws.
INSTALL WINDOW PANEL
Installation in a sliding sash window
(CV-PD13PX)
E-16
Window panel
Foam seal A
Window panel
Window exhaust adapter
Cut
Window panel
CV-P13PX_eng.indd 18 09.1.26 3:36:22 PM