Filter
Top Products
OPERATING INSTRUCTIONS
Control Panel
Indicator Lights
•
Power Indicator Light
The power indicator light will turn on when the unit is plugged in, regardless of whether the unit is operating
or not.
•
Tank Full Indicator Light
The tank full indicator light will turn on when the drainage tank is full or positioned incorrectly. If light is
on, empty the water out of the drainage tank and make sure the tank is positioned properly.
•
Power Level Indicator Lights
When each light is respectively lighted it indicates that the power level is Medium, High, or Quiet.
•
Humidity Level Indicator Lights
When each lamp is respectively lighted, it indicates that the current setting for room humidity is 50%, 60%,
or 70%. When the room humidity reaches the set level, the compressor will shut off.
•
Continuous Dehumidification Indicator Light
When this light is on, it indicates that the operation is in continuous mode. The unit will continue
dehumidifying, no matter what the room humidity is.
Button Functions
•
Power Button
Press the button once to start operation, press it again to stop operation.
•
Power Level Button
Each time the button is pressed, the power level changes in the order of: Med, High or Quiet.
•
Humidity Level Button
Press to set the desired humidity level in the room, which can be set in the order of: 50%, 60%, 70%,
and continuous. When the relative humidity of the room is lower then the selected humidity, operation
will stop automatically.
When the unit is turned on, the default operation mode is the continuous mode. In this mode, operation
will continue until the unit is turned off or will stop automatically when the drainage tank is full.
7