Soleus Air CFM-25E Dehumidifier User Manual


 
IMPORTANT SAFETY INSTRUCTIONS
NOTE: The WARNING instructions issued in this manual are not meant to cover all possible conditions
and situations that may occur. It must be understood that common sense, caution and care are factors
that must be used when installing, maintaining, or operating the dehumidifier. Failure to install, maintain,
and/or operate the equipment according to the manufacturer’s instructions may result in conditions which
can produce bodily injury and/or property damage. Contact your dealer, service agent or the
manufacturer about any problems or conditions you do not fully understand.
FOR YOUR SAFETY – To reduce the risk of fire or explosion, do not store or use gasoline or other
flammable vapors or liquids in the vicinity of this dehumidifier.
ELECTRICAL SERVICE INFORMATION – To reduce the risk of fire, electric shock or personal injury, all
wiring and grounding must conform to the latest edition of Local and National Electrical Codes. It is the
customer’s responsibility to have the wiring and fuses checked by a qualified electrician to make sure
adequate electrical power is available.
GROUNDING INSTRUCTIONS – Improper connection of the equipment-grounding conductor can result
in a risk of electrical shock. Check with a qualified electrician or servicemen if you are in doubt as to
whether your appliance outlets are properly grounded.
This dehumidifier must be grounded. In the event of a malfunction or breakdown, grounding will reduce
the risk of electrical shock by providing a path of least resistance for electrical current. This dehumidifier
is equipped with a cord having an equipment-grounding conductor and 3 prong grounded plug. The plug
must be connected into an outlet that is properly installed and grounded in the accordance with all local
codes and ordinances.
Do not modify the plug provided with the dehumidifier. If it will no fit the outlet, have a proper outlet
installed by a qualified electrician.
If the household electrical supply does not meet specifications, or if you are not sure your home has an
effective ground, have a qualified electrician or your local electrical utility company check it and correct
any problems.
All wiring must comply with local and national electrical codes and be installed by a
qualified electrician. If you have any questions regarding the following instructions,
contact a qualified electrician.
Check available power supply and resolve any wiring problems BEFORE installation
and operation of this unit.
For your safety and protection, this unit is grounded through the power cord plug
when plugged into a matching wall outlet. If you are not sure whether the wall outlets
in your home are properly grounded, please consult a qualified electrician. DO NOT
USE PLUG ADAPTERS OR EXTENSION CORDS.
The manufactures nameplate is located on the rear technical data specific to this unit.
To avoid the possibility of personal injury always disconnect the power supply to the
unit, before installing and/ or servicing
NOTE: Specifications are subject to change without notice, for further improvements.
3