Filter
Top Products
Model 5100-XX-IT Toxic Gas Sensor Module
Page: 29
7. APPENDICES
APPENDIX A - SPECIFICATIONS
Sensor type: Electrochemical
5100-03-IT O2 5100-04-IT CO 5100-05-IT H2S 5100-06-IT Cl2
Max. Range 0-25 %Vol 0-1000 PPM 0-100 PPM 0-10 PPM
User Settings Range 0-100, 0-500, variable 0-10, variable 0-5, variable
Zero Drift +/- 0.1% +/- 1 PPM +/- 0.5 PPM +/- 0.5 PPM
Repeatability +/- 0.2% +/- 1 PPM +/- 1 PPM +/- 0.5 PPM
Linearity +/- 0.2% +/- 1 PPM +/- 1 PPM +/- 0.5 PPM
Resolution +/- 0.1% 0.5 PPM 0.1 PPM 0.1 PPM
Response Time (1) <10 sec <25 sec. <30 sec. <60 sec
Accuracy +/- 0.2% +/- 1 PPM +/- 0.5 PPM +/- 0.5 PPM
Sensor Life 2 years 2 years 2 years 2 years
(1) Response time to 90% full signal value for applied concentration
(2) Sensor life typical for use at standard temperature and pressure with occasional exposure to gas of interest
Output:
Display: Fixed and Scrolling LED
Relays (Optional): 8 Amp, High Alarm, Low Alarm, 2 Amp Trouble all SPDT
Analog Output (Optional) Analog 4-20 mA (Trouble 0 mA, Calibration 1.5 mA)
Signal Output: Sentry bus
Serial RS-485 Modbus RTU
Input:
Remote Alarm Reset: Normally open digital input (supervised or non-supervised)
Electrical Data:
Power consumption: 2 watts
Connection type: 3 wire
Input voltage: 24 VDC nominal: 10-30VDC
Operating Range:
5100-03-IT O2 5100-04-IT CO 5100-05-IT H2S 5100-06-IT Cl2
Ambient Temp (
o
F) 5 to 122
o
F -4 to 122
o
F -40 to 122
o
F -4 to 122
o
F
Ambient Temp (
o
C) -15 to 50
o
C -20 to 50
o
C -40 to 50
o
C -20 to 50
o
C
Relative Humidity 5 – 99% 5 – 99% 5 – 99% 5 – 99%
Enclosure:
Material - Standard: Polyester powder-coated, sand-cast, copper-free aluminum
Material - Stainless Steel Option 316 Stainless Steel (FM approval pending)
Dimensions: 7.5 x 5.0 x 4.8 inches Al, 7.5 x 5.0 x 4.4 inches SS
(H x W x D) (21.6 x 12.7 x 12.2 cm)
Weight: 2.7 lb. (1.3 Kg) (standard Aluminum enclosure)
5.4 lb. (2.6 Kg) 316 Stainless Steel
Housing: NEMA 4X
Electrical Classification
Performance: Explosion proof, Class 1, Div. I, Groups B, C, D
Class I, Zone 1, groups IIB+H2 IP66
Approvals: FM Approved Performance and Safety Approval Pending