Filter
Top Products
Table of Contents Previous Page | Next Page
19
82387 No. 66
FOOT HEMMER
Felling
The two pieces of cloth to he felled should be
laid one over the other, right sides together,
the edge of the under piece being a little far-
ther to tile right than the upper piece. Stitch
them together using the hemmer as a presser
foot, the front end of the hemmer forming a
guide for tile edges of both pieces, the upper
piece being guided by the inside and the
under piece by the outside of the projecting
front of the foot hemmer (see Fig. 23). Then
open the work out flat, wrong side up, the
edges straight, and taking the edges near the
beginning of the seam in the right hand, and
the ends of the threads in the left hand, draw
the edges into the hemmer which will ill turn
them as in hemming. Guide the second row
of stitching by following the first row with the
inside of the projecting front of the foot hem-
mer (see Fig. 24).
FIG. 23
FIG. 24