Singer 4830 Sewing Machine User Manual


 
5
4830 & 4832
WARNING continued...
Do not attempt to adjust the motor belt.
Contact Your nearest Service Center
should any adjustment be required.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Handle the foot controller with care and
avoid dropping it on the door. Be sure not
to place anything on top of it.
Always use the proper throat plate. The
wrong plate can cause the needle to break.
Do not use bent needles.
When sewing, keep fingers away from all
moving parts Special care is required
around the sewing machine needle.
Do not pull or push fabric while stitching. It
may deflect the needle causing It to break.
Before removing the bobbin case, remove
plug from the socket outlet.
For double insulated machines. when serv-
icing use only identical replacement parts
Never operate the machine if it has a
damaged cord or plug, If it Is not working
properly, If it has been dropped or dam-
age; or dropped into the water, return the
machine to the nearest authorized dealer
or Service Center for examination, repair,
electrical, or mechanical adjustment.
Never operate the machine with any air
openings blocked. Keep ventilation open-
ings of the machine and foot controller
free from the accumulation of lint, dust,
and loose cloth
Never drop or insert any object into any
opening.
Do not use outdoors
Do not operate where aerosol aerosol
(spray) products are being or oxygen is
administered .
Do not allow to be used as a toy. Close
attention is necessary when the machine
Is used by or near children.
SAVE THESE INSTRUCTIONS
Servicing should be performed by an
authorized service representatives.
This product is intended for
household use.