Singer 4205 Sewing Machine User Manual


 
Une boutonnière parfaite et équilibrée.
Densité
standard
Densité
standard
Densidad adecuada
Densidad adecuada
4
1
2
3
Trop éloignés
Trop proches
Muy abiertas
Équilibrage de la boutonnière
Step 2
ème
2 temps
Paso 2
2
Step 3
ème
3 temps
Paso 3
Step 4
ème
4 temps
Paso 4
3
4
2
3
4
Poursuivez la couture jusqu'à ce que les quatre côtés de la boutonnière soient terminés.
2
0
5
4
3
1
49
11
Boutonnières
Coupez l'ouverture de la boutonnière.
Muy cerradas
Continúe hasta que se cosan los cuatro lados del ojal.
Abra el ojal.
Regulación del ojal
Un ojal perfecto, bien regulado.
Ojales
Continue until all four sides of the buttonhole are sewn, being sure to raise the needle before
turning the Pattern selector dial between each step.
Open the buttonhole.
Balancing the buttonhole
A perfect, well balanced buttonhole.
Standard
density
Standard
density
Too open
Too close
Buttonholes
11
Boutonnières
Placez le tissu sous le pied presseur. La première ligne
rouge du pied presseur doit être alignée avec le
marquage du bouton sur le tissu. Cette ligne représente
le point de départ de la boutonnière 4 étapes.
Abaisser le pied presseur.
1
Appuyez sur le rhéostat. La machine coud un
petit point zigzag en arrière. Quand les
points arrivent jusqu'au marquage du tissu,
arrêtez la machine. C'est la première étape.
1
Start
Début
End
Fin
Relevez l'aiguille et réglez le bouton de sélection du
point sur la 2ière étape.
Step 1 / 1 Étape / Paso 1
48
Fim
Inicio
Coloque la tela debajo del prensatelas para ojal
alineando primero la primera línea roja en el
prensatelas con la línea de su tela. Este será el punto
inicial del ojal en cuatro pasos.
Baje la palanca del prensatelas.
Cosa. La máquina coserá un pequeño
Zigzag en reversa. Deje de coser cuando la
puntada alcance la marca en la tela. Este es
el primer paso del ojal en cuatro pasos.
Levante la aguja y gire el selector de puntadas a la
segunda parte del ojal.
Ojales
Place the fabric under the foot aligning the first red line
on the foot with the line on your fabric. This will be the
starting point of the four step buttonhole.
Lower Presser foot lifter.
Sew. The machine will sew a narrow Zig-zag in
reverse. Stop sewing when the stitching reaches
the mark on the fabric. This is the first step
of the four step buttonhole.
Raise the needle and turn the Pattern Selector to the
second part of the buttonhole.
Buttonholes