Filter
Top Products
6
High Speed Straight Lockstitch Sewing Machine | Instruction Manual and Parts List
Oil Reservoir
Installation
3.2
The oil reservoir should rest on the
four corners of the machine table
groove.
Two rubber seats ‘1’ for supporting
the head portion on the operator
side ‘A’ are fixed on the extended
Two hinges ‘1’ fit into the hole in the
machine bed, and the machine head
fitted the table hinge’s rubber ‘2’,
before the machine head is placed
portion of the table by using nail ‘2’,
and the other two rubber cushion ‘3’
on the hinge side ‘B’ are attached by
nail too. Then, the oil reservoir ‘4’ is
placed (Figures 2 and 3).
to the cushions ‘3’ on the four cor-
ners of the table (Figures 4 and 5).
Figure 2 Figure 3
Figure 4 Figure 5
23.5mm
19.5mm