Filter
Top Products
11
High Speed Straight Lockstitch Sewing Machine | Instruction Manual and Parts List
3.8
3.9
Bobbin Case
Attachment
Machine
Threading
Fix the bobbin into bobbin case with
that the thread open end is directed
to the left as observed from you.
Pass the thread through thread slit
‘A’, and pulls it in direction ‘C’. By
doing so, the thread will pass un-
When threading the machine head,
the needle bar should be at the
highest point of its stroke.
der the tension spring and come
out from notch ‘B’ (Figure 13).
When pulling the thread ‘C’, the
bobbin should rotate in the direc-
tion of the arrow.
Thread the machine in the order
shown below. Leave thread ap-
proximately 4 cm long in the needle
(Figure 14).
Figure 13
Figure 14