Filter
Top Products
Operating Procedures / Photos
Unscrew the 5 screws fixing the panel and
dextrorotate the front panel to pull it out from
groove.
Unscrew the 2 screws fixing electric box ,and then
unscrew the 5 screws fixing the right side plate to
remove it.
4. Disassemble Front Panel
6. Disassemble Electric Box
5. Disassemble Right Side Plate
Right Side Plate
Screws
Unscrew the screws fixing the electric box, and
then pull out the inset block of lead-out wire of
compressor
and fan motor to take out the electric
box.
Screws
Screws
Screw
Electric Box