Filter
Top Products
Front Panel
(Conventional 12) Disassembly procedures for indoor unit
1. Disassemble the front panel, filter
Filter
Bend the guide louver so that the movable
lock of guide louver is released to remove the
guide louver.
2. Disassemble the guide louver
Screws
Operating Procedures / Photos
Guide louver
Open the 2 screw covers at the front case and
screw off 1 screws. Pull out the movable latch at
the front case with hand and then pull it back-
wards to disassemble the front case.
3. Disassemble the front case
Push the rotating shaft of front panel outwardly,
to make it out of the groove, then can take down
the front panel.