Filter
Top Products
22
Troubleshooting
Troubleshooting
Problem Possible cause Corrective action
Decrease in
suction strength
Dirt recipient / Bag
is full
Empty dirt recipient / change
bag (see page 17 to 19).
Dirt recipient is not
properly attached
Check clamps holding dirt
recipient, to make sure they
are tight, and dirt recipient is
aligned.
Open vacuum inlet Close all vacuum inlets not in
use.
Exhaust line is
clogged
Verify that no object is blocking
the exhaust.
Blocked hose Plug the handle end of the
hose into the suction inlet, thus
reversing the suction in the
hose. Cover the gap around
the handle, to ensure suitable
suction strength, and ensure
contact with inlet contacts to
start the unit. This should clear
the hose.