Simplicity H60 & H110 Vacuum Cleaner User Manual


 
11
Installation
Mufer Installation (Optional)
1. Insert the rubber coupling on the vacuum air exhausts.
2. Using a Phillips screwdriver, tighten the clamp collar to ensure ad-
equate sealing.
3. Insert the 90° elbow into the rubber coupling, and tighten then clamp
collar as per instructions in step 2.
4. Apply ABS glue to the 90° elbow and insert muffler.
5. For H110, repeat steps 1 to 4 to install second muffler turned down.
Electric Connections
There should be an electric outlet within 1 meter (3 feet) of your central
vacuum unit. Once the appliance is installed in a suitable location, con-
nect your central unit to an electric outlet on an dedicated* grounded
circuit. Do not use extension cords or modify the length of your vacuum
cleaner’s power cord.
Dedicated* grounded circuit
• NorthAmerica
120 V / 240 V All models: 15A
Your central vacuum cleaner has a thermal safety device or a circuit break-
er to protect against any over voltage or electrical defect. If that protection
should fail, contact your authorized service center.
*Please reserve a circuit breaker dedicated only to the connections for your
central vacuum.
If you nd that installing your vacuum cleaner is too difcult, ask your service
center to install it for you. When in doubt, it is better to have the work done by a
professional and ensure that the unit is properly installed. Any installation that
does not comply with the specied norms could alter or invalidate the warranty.
B
C
D
A
A
A. Rubber coupling
B. 90° elbow
C. Muffler
D. Air Exhaust
Glue not included