Filter
Top Products
20
Maintenance
Carbon Dust Filter
(H60 & H110 models)
We recommend changing this lter after three bag
replacements. The integrated monitor will indicate
when to change the lter. These indications are
provided by an electronic timing board, only as a
reference guide.
To do so:
1. Unlatch the opening on the carbon filter
case and gently flip it upward (figure 21).
2. Remove the used filter, and discard
(figure 22).
3. Insert the new filter. When doing so, please
ensure that the arrow printed on the filter
itself points outwards (figure 23).
4. Close casing, and latch.
gure 21
gure 23
gure 22