Filter
Top Products
SmartPad by Seiko Instruments 5
3. Attach Your Handheld
Your handheld must be placed in the designated area of the SmartPad portfo-
lio so the infrared ports of the two devices can communicate properly. Two
self-adhesive strips of hook-and-loop material keep the handheld securely in
place.
The hook-and-loop material provides an extremely aggressive bond. That’s
terrific if you plan to leave your handheld in the SmartPad portfolio nearly
all the time. But if you expect to frequently remove and replace the handheld
from the portfolio, we suggest you use only half of the self-adhesive loop
material, as follows:
1. Without separating the backing strips, remove the two loop strips from
the portfolio’s hook strips to which they’re attached.
2. Cut one of the strips in half lengthwise. Save the other strip for future
use.
3. Replace the two half strips on the portfolio’s matching hook material.
4. Continue with the following procedure.
To attach the handheld:
1. Remove the backing from the self-adhesive strips in the SmartPad port-
folio.
2. Place the handheld on the strips, centering it on the pad area to which the
hook-and-loop strips are attached.
3. Press firmly to adhere the strip to your handheld.