Filter
Top Products
SmartPad by Seiko Instruments 3
2. In the Open box, type d:\setup (replace d with the drive letter of your CD
drive) and then click OK.
Alternatively, double-click My Computer, double-click the icon for your
CD drive, and then double-click Setup.exe.
Setup Tips
• During setup you might be asked for the hardware serial number. The
serial number is located under the paper writing pad, in the lower-left
hand corner.
• The first part of the serial number might already be displayed in the form.
Be sure you don’t repeat the first few characters. The hardware serial
number begins with the characters SP00.
• On Windows NT, 2000, or XP, you must have administrative rights to
install the software.
• If you get an error during setup, disable your anti-virus program and run
setup again.