Filter
Top Products
4
immediately. To obtain this degree of expertise you must acquaint yourself with every component and stove function. Never
guess!
TOOLS & SERVICE KIT
The tools and equipment needed for servicing the Easyfire Pellet Stove are as follows:
a. Good shop vacuum with blower capabilities.
b. Set of socket drivers which must include 11/32, 1/2 & 7/16 sockets or nut drivers.
c. Phillips and plastic coated slot screw drivers
d. Flashlight
e. Extension cord with ground
f. Allen wrench set (long handle)
g. Wire stripper and cutter
h. Electrical continuity tester with light or LED
i. Fully charged 12V Gel Cell Battery at least 30amp
j. Assorted crimp connectors with crimp tool
The Easyfire Service Kit which includes:
a. Fan Motor, Feed Motor
b. Main Circuit Board
c. Switch Board (control board and knob)
d. One each T-1 and T-2 Sensor
e. Three (3) each fuses, (1A, SB) for rear panel AC Line
and 5mm fuse (6.3A, SB) for main board 12V line.
f. Digital read out volt multi meter
h. One each bridge rectifier