Filter
Top Products
-2- Shop Fox
®
Fence
SECTION I: INTRODUCTION
Thank you for purchasing Woodstock
International’s Shop Fox
®
Fence. The Item W1410
Shop Fox
®
Fence was designed by Woodstock’s
engineering staff to provide the woodworker
with a precision alternative to standard table saw
fences. The Shop Fox
®
Fence fits most contractor
and cabinet-style table saws with tables measuring
27" from front to back.
The key to the Shop Fox
®
Fence’s accuracy is its
unique roller tracking system, which allows the
fence to hold precise alignment with the blade,
even when the locking system is disengaged. This
consistency allows the woodworker to make even
the most minute adjustments with complete con-
fidence.
The Shop Fox
®
Fence features polished and black-
anodized aluminum construction with built-in
micro adjustment knobs on either side of the posi-
tive locking lever. A T-slot on top of the fence
is designed to accept Woodstock’s Board Buddies
®
hold down rollers. Optional extension rails are
also available for the Shop Fox
®
Fence for use
with wider materials such as plywood and wood
composites.
Woodstock is pleased to provide this manual to
assist in the installation and operation of the Shop
Fox
®
Fence. It represents our effort to offer the
finest documentation available. If you feel there
are areas where this manual could be improved,
we encourage you to write us with your comments
at the following address:
Technical Documentation
Woodstock International, Inc.
P.O. Box 2309
Bellingham, WA 98227
(360) 734-3482
Fax (360) 671-3053