Filter
Top Products
E-12
The unit will operate quietly using
minimal air in
take.
The unit will operate at a fan speed
of MEDIUM.
The unit will operate at a fan speed
of MAX.
The fan speed is automatically switched
(between HIGH and LOW) depending on the
amount of impurities in the air. The sensor
detects impurities for effi cient air purfi cation.
OPERATION
MAIN UNIT OPERATION
Power ON/OFF Button
• Press to start operation (short beep) and stop operation
(long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator
Light turn on/off.
• Unless the power cord has been unplugged, the opera-
tions starts in the previous mode it was operated in.
Fan Speed Button
• Press the Fan Speed Button to select the desired fan
speed. Indicator Lights will show the fan speed cur-
rently selected.
• The operation mode can be switched as below.
Plasmacluster Ion ON/OFF Button
Press the Plasmacluster Ion ON/OFF Button to turn
Plasmacluster Ion Mode ON and OFF.
When Plasmacluster Ion is ON, the Plasmacluster Ion
Indicator Light will turn on.(blue)
To select Clean Air mode, be sure the water tank and humidifying tray are empty.
To select Clean Air plus Humidify mode, fi ll the water tank and install on the unit.
Fan Speed Indicator Lights
Plasmacluster Ion Indicator Light
Fan Speed Button
Plasmacluster Ion
ON/OFF Button
POWER ON/OFF
Button