Filter
Top Products
OPERATION
MAIN UNIT OPERATION
E-8
Power ON/OFF Button
• Press to start operation (short beep) and stop operation (long
beep)
• Plasmacluster Indicator Light and Fan Speed Indicator Light
turn on/off.
• Unless the power cord has been unplugged, the operations
starts in the previous mode it was operated in.
Fan Speed Button
• The operation mode can be switched as below.
AUTO operation
POLLEN mode operation
The unit will operate at HIGH* fan speed for 10 min-
utes, then will alternate between MEDIUM and
HIGH* for 20 minutes.
10 minutes: HIGH fan speed
20 minutes:
MEDIUM fan speed
20 minutes: HIGH fan speed
SILENT operation
MEDIUM operation
MAX operation
* HIGH fan speed is an intermedi-
ate speed between MEDIUM
and
MAX.
ION SHOWER operation
Plasmacluster ON/OFF Indicator Light
Fan Speed Button
Plasmacluster ON/OFF Button
POWER ON/OFF Button
CLEAN - SIGN Light
Plasmacluster Indicator Light
Fan Speed Indicator Lights
The fan speed is automatically switched (MEDIUM,
LOW) depending on the amount of impurities in the air.
The sensors detect the impurities for efcient air puri-
cation.
By continuously discharging strong airow for 15 min-
utes the unit effectively removes airborne dust, pol-
len, mold and allergens from the air as they are drawn
through the lter system.
• When the operation nished, the unit will return to the
AUTO operation.
The unit will operate at a
fan speed of MAX.
The unit will operate at a
fan speed of MEDIUM.
The unit will operate
quietly using minimal air
intake.
* LOW fan speed is an intermedi-
ate speed between SILENT and
MEDIUM.
FU-W28E.eng.indd 10 08.11.13 3:45:53 PM