Filter
Top Products
OPERATION
MAIN UNIT OPERATION
The unit will start operation when the MODE-ON/OFF button is pressed.
(The unit will start operation in AUTO mode)
• During operation, the cluster ion lamp will light.
(During start of operation, the cluster ion mode will be AUTO)
The operation mode suitable for the usage condition can be set.
Stop
AUTO operation
The fan level is automatically switched (High, Median, Silent) depend-
ing on the amount of pollution in the air detected by the dust sensor for
efficient air purification.
Silent operation
The unit will operate using little air.
Median ~ Max operation
The unit will operate with fan level of median, high or max.
*
Tobacco smoke mode operation
The unit will operate in High for 10 minutes, then the unit will return to
the AUTO mode.
10 minutes: High fan level
AUTO mode operation
Pollen mode operation
The unit will operate in High for 10 minutes, then the unit will alternately
operate between Median and High.
10 minutes: High fan level
20 minutes: Median level
20 minutes: High fan level
For the first 30 seconds after the power plug is inserted
into the wall outlet, the unit will check the conditions of
the air. If operation is set to ON during this time, the
Clean sign lamp will alternately flash in green, orange
and red. During this time, the Cluster ion lamp will light
blue and the unit will be in the Clean mode.
Cluster ion lamp
•AUTO operation
• Silent operation
•Median level operation
• High level operation
•Max level operation
•
*
Tobacco smoke mode
operation
• Pollen mode operation
Operations available with
main unit
E-10
Plasmacluster
*
It can not remove the noxious
substances (carbon monoxide
etc.) from cigarette smoke.
MODE-ON/OFF button