12
Problem Check points Action
TROUBLESHOOTING
Before asking for repairs or making any inquiries, please check the following points.
Motor/Operation
Stops operating.
Motor does not turn on
when the power switch
is turned on.
SHARP CORPORATION
Osaka, Japan
• Is the cylinder type filter clogged?
• Is the dust cup full of dirt?
• Is the filter clogged?
• Are the main body, metal telescopic
tube, suction head clogged?
• Check that the power cord and plug is properly plugged into an electrical outlet.
• Maintenance.(Page7-11)
• Remove dust.(Page 7)
Suction power/sound
Suction power is weak.
Operation sound becomes
loud/changes.
• Is the cylinder type filter clogged?
• Is the dust cup full of dust?
• Is the filter clogged?
• Are the main body, metal telescopic tube,
suction head clogged?
• Maintenance.(Page7-11)
• Remove dust.(Page 7)
Smell
The main body/exhaust
smells.
• Is the dust cup full of dust?
(Some kinds of dirt may cause smell.)
• Is the cylinder type filter or filter dried
enough?
• Discard dirt.(Page 7, 8)
• Wash them again and fully dry.
(Page9-11)
Dust cup
Difficult to set the dust
cup to the main body.
• Check for any dust blocking the bottom
of the attach part of the main system.
• Is the dust cup properly set up?
• Is the filter case or filter properly set up?
• Remove dust or other object. (Page 7)
• Set the filter case and filter properly.
(Page 7, 11)
Auto cleaning
Press the Off button and
the operation starts again.
The operation noise of
the cleaning mechanism
is unusual.
• Is the cleaning mechanism is in automatic operation.(Page 6)
• Did you allow the product to suck in any
large solid items?
• Remove dust.(Page 7)
Cord
The plug or power cord
is extremely hot.
• Is the power cord loosely plugged into
the outlet?
• Are you using an extension cord?
(Under normal situation, the power cord
and its plug may reach up to 40°C.)
• Be sure to insert the power plug
completely.
• Do not use an extension cord.
2
CN
TINSJA427VBRZ 2EK
Printed in China
EC-S2142,S2141.indd 12 12.5.8 2:58:26 PM