Filter
Top Products
10
NOTE
TAKING CARE OF THE PRODUCT
Dust cup (Taking care of each component.)
Clean of it over a newspaper etc.
Filter cover
Cup cover (Cylndrical filter)
Dust cup
High efficiency air filter
Clean it with the supplied cleaning
brush.
(Mounted on the product)
After use, store it in the
direction shown in the
drawing.
• Do not use chemicals, warm water, etc.
• After cleaning, leave it in the breezy shade until it
becomes completely dry. Do not use a drier etc. at all.
(Using the dust cup before it becomes completely
dry may create a smell or cause malfunctions.)
Wipe with cloth soaked in water
or diluted neutral detergent.
Washing with water
• Remove the dust by tapping
the filter on the floor with
newspapers etc. spread out,
and then wash with water.
Dry completely in the shade.
Measure of drying
time: For a day.
• If it is not possible to remove
odor even after such efforts,
soak it in a solution of 10 mL
of bleach diluted with a liter
of water for about 3 hours,
and rinse.
Water or diluted neutral detergent
Cylindrical filter (Clean gently.)
Measure of drying time:
For a day.
Shake it sufficiently to
drain off the excess water.
Water or diluted neutral detergent
Dry it sufficiently after washing.
Turn it upside down and press the lever
located on the bottom surface to open the
bottom lid.
If it is hard to open the bottom lid, clean the section marked with • thoroughly to remove foreign objects.
Screw fin
Gear wheel
(Continued)
Cover assembly
Dry completely in the shade.
EC-S2142,S2141.indd 10 12.5.8 2:58:23 PM