Sharp CV-P10LC Air Conditioner User Manual


 
AUXILIARY MODE
MAIN UNIT OPERATION
1
E-28
Use this mode when the remote control is not available.
1
Press the POWER button on the unit.
• The red OPERATION lamp on the unit will
light.
If the unit has not been unplugged since it was
last operated, it will resume operation at its
last settings.
If the unit has been unplugged since it was
last operated, it will resume operation in the
cooling mode, set at 68˚F. The fan speed set
to AUTO.
TO TURN OFF
Press the POWER button again.
The red OPERATION lamp on the unit will turn off.
NOTES:
Upon starting MAIN UNIT operation, the drainage pump inside the unit runs for
about a minute, which may produce an audible gurgling sound.