Filter
Top Products
ASSEMBLING YOUR CANISTER VACUUM
IMPORTANT: Remove all the parts from the packaging.
Do not plug the unit into a power source before you have
assembled the vacuum canister or when attaching or
removing accessories.
Attaching the Hose to the Canister
1. Insert the hose into the air intake duct of the canister
vacuum. Push it in and turn it clockwise to lock in place.
(Fig. 1)
2. Attach the connecting power cord from the hose to the
connecting power cord receptacle on the vacuum.
(Fig. 2)
3. To remove the hose, unplug the hose connecting power
cord and then push the hose in, turn counterclockwise
and then pull it out.
Thank you for purchasing an Infinity Vacuum. To ensure your vacuum never loses suction,
you must perform regular maintenance tasks. Refer to your Owner’s Manual for step by step
instructions.
Attaching the Telescopic Tube to the Hose
Handle
1. Holding the telescopic tube insert it into the telescopic
tube receptacle that is on the hose handle. Push the
telescopic tube in until it is locked in place.
(Fig. 3, Fig. 4)
Attaching the Telescopic Tube to the Power
Nozzle
1. To attach the telescopic tube to the power nozzle, insert
the telescopic tube into the power nozzle. (Fig. 5)
Fig. 1
Fig. 2
4. To remove the telescopic tube from the power nozzle,
step on the telescopic release and pull the tube out.
(Fig. 5)
Extending the Telescopic Tube
1. Hold the telescopic tube adjusting collar, push to
extend and pull to retract. (Fig. 7)
Fig. 3
Push in
Fig. 4
Locked
Position
4
Adjusting
Collar
Extend
Retract
Fig. 7
Fig. 5
Telescopic
tube release
Step here to
release
telescopic tube
2. To adjust the carpet height of the agitator, step on the
carpet height selector that is in the back of the power
nozzle. (Fig. 6)
3. There are four (4) different carpet heights. Each time the
carpet height selector pedal is depressed, the carpet
height selector window will change colors. (Fig. 6)
- Blue: Extra Low
- Green: Low
- Yellow: Medium
-White: High
Carpet Height
Selector Pedal
Viewing Window
Fig. 6