Filter
Top Products
Page 9
PROBLEM
Does not turn on
Green and amber lights
are on & machine
shuts off - brush stops
spinning
Amber light flashing
Does not pick up
REASON
1. Te lescopic tube not inserted properly.
2. Not plugged into good outlet.
3. Cable worn.
4. The power control slider switch is
set to “0” (“off” position).
1. Jammed brush roller.
2. Clog in airflow pathway or swivel
neck.
3. Overload shut down from exces-
sively deep but loose carpet pile
(e.g., long shag carpet).
1. Brush is adjusting to carpet pile.
1. Telescopic tube tube not
inserted properly.
SOLUTION
1. See page 5.
2. Use another outlet.
3. Replace cable.
4. Slide the power control slider
switch to “on” position.
1. Remove brush roller obstruction.
See page 8.
2. Remove clog. See page 8.
3. If carpet pile is too deep and loose,
then use a “shag rake” attachment
instead of the ET-H power head.
1. Ignore
1. See page 5.
Trouble-Shooting Guide
Always unplug vacuum from outlet before dismantling any part of the machine!
!
Check your C3.1 or K3 canister user’s manual for more trouble-shooting problems and solutions.