Sears Vacuum Cleaner Vacuum Cleaner User Manual


 
S
Personal injury and Product Damage Hazard
. DO NOTplug in if switch is in ON position.
Personal injury or damage could result.
* The cord moves rapidly when rewinding. Keep
children away and provide a clear path when
rewinding the cord to prevent personal injury_
, DO NOT use outlets above counters. Domaqe to
items in surrounding area could occur.
Cord
I. Pull cord out of
canister to desired
length. The cord
will not rewind until
the cord rewind
bar is pushed,
2. Plug power cord into 120°vo!t outlet tocated near
the floor,
To rewind: unptug the cleaner. Hold the plug while
rewinding to prevent damage or injury from the
moving cord. Push cord rewind bar.
Pile Height
Indicator
Handle
Retease Pedal
Pile Height
Pedal
3. Lower wand from upright position by pressing on
the handle release pedal,
4. Select a pile height seffing by pressing the small
pedal on the rear of the POWER-MATE.TMThe pile
height setting shows on the indicator. See
"SUGGESTEDPILEHEIGHTSETTINGS"on page 8,
Select a switch position
on the handle,
OFF
FLOOR - turns on the Can.ster motor onJy,
CARPET- turns on both the Canister and
the POWERoMATETMmotors,
7