Sears 583.35682 Electric Heater User Manual


 
OPERATION
Continued
STORING,
TRANSPORTING,
OR SHIPPING
PREVENTATIVE
MAINTENANCE
SCHEDULE
To Stop Heater
l. Unplug extension cord from outlet.
To Restart Heater
l. Wait 2 minutes after stopping heater.
2. Repeat steps under To Start Heater, page 7.
Note: If shipping, transport companies require fuel tanks to be empty.
1. Drain fuel tank.
Note: Some models have drain plug on underside of fuel tank. If so, remove
drain plug to drain all fuel. If heater does not have drain plug, drain fuel
through fuel cap opening. Be sure all fuel is removed.
2. Replace drainplug if provided.
3. If any debris is noted in old fuel, add 1 or 2 quarts of clean kerosene to tank,
stir, and drain again. This will prevent excess debris from clogging filters
during future use.
4. Replace fuel cap or drain plug. Properly dispose of old and dirty fuel. Check
with local automotive service stations that recycle oil.
5. If storing, store heater in dry place. Make sure storage place is free of dust and
corrosive fumes.
IMPORTANT. Do not store kerosene over summer months for use during next
heating season. Using old fuel could damage heater.
WARNING
Never service heater while it is plugged in, operating, or
hot. Severe burns and electrical shock can occur.
Item
Fuel tank
Air output and
lint filters
Air intake
filter
Fuel filter
Spark plug
Fan blades
Motor
How Often
Flush every 150-200 hours
of operation or as needed.
How To
See Stori_, Transporting, or
Shipping, above.
Replace every 500 hours of
operation or once a year.
See Air Output, Air Intake,
and Lint Filters, page 10.
Wash and dry with soap and
water every 500 hours of op-
eration or replace as needed.
See Air Output, Air Intake,
and Lint Filters, page 10.
Clean twice a heating season
or replace as needed.
See Fuel Filter, page 11.
Clean and regap every600
hours operation orreplace
as needed.
See Spark Plug, pages 11
and 12.
Clean each season or as needed. See Fan, page 10.
Not required/permanently lubricated.
10050d