Sears 385. 1254180 Sewing Machine User Manual


 
Zigzag Stitches (Continued)
o Monogramming
Set the Math+he
St+tch selector
!
Top thread tecs_on
¢ontro_ ] to 4
Stitch length
0 to 24
!
Sa_+n stitch foot
32
3,
Set the same as satin stitch,
Here's How
1.
2. Back the fabric with paper or
interfacing.
Draw the demgn on to the fabr+c
with tailor's chalk.
4. Satin stitch+ adjusting the stitch
width as necessary to form each
pattern,
5. If us+ng paper, carefully remove it
when you have finished sewing.
o Embroidery
Set the Machine
Top thread tens+on
contro+ + to 4
No presser
toot
Stitch lenglh
Any number
(not necessary
toadiust)
I
C
Darmng plate
Here's How
1. Put the darning plate over the needle
plate (see p. 27).
2. Remove presser foot.
3. Adiust the stLtch width as desired
(see p. 200).
4. Draw the demgn on to the fabric w+th
tailor's chalk+
5. Stretch the fabric between
embroiderv hoops and place under
the needle.
6.
7,
Lower the presser foot lever to
engage the top thread tension.
Hotd_ng the top thread in your left
hand, rotate the hand wheel toward
vou one complete turn,
Pull the top thread to draw the
bobbin thread through to the
surface of the fabric.
8+ Using a medium speed, stitch along
the marked outline, guiding the
fabric carefultv by hand.