Filter
Top Products
Prepare the Bobbin :(Continued)
= Wind the Bobbin (Continued)
f
j /
Draw thread from spool through bobbin
winder tension disc as shown.
......... i¸¸ iiiii!!iiiii: i d¸ii
Putl end of thread through hole
bobbin as shown,
7
in Place bobbin onto bobbin winder
spindle with end of thread coming from
the top of the bobbin. Push bobbin
winder shaft to the right until it dicks.
Holding onto end of thread, start ma-
chine. When bobbin is slighttv filled,
snip off end of thread.
Wind thread unti! winder stops. Remove
bobb,,n. Clip thread.
Tighten clutch knob.
14